Restrittori – Limitatori di flusso
Restrittori limitatori di flusso filettati o ad espansione.
Filettature Metriche, UN, NPTF, a richiesta
Il materiale standard è Inox AISI303 o rame – Il diametro di passaggio è a richiesta del cliente
I modelli filettati possono essere facilmente sostituiti per regolare il flusso in base alle esigenze di taratura del cliente.
Fornibili modelli speciali a richiesta.
RT/RP
| COD. | Filetto |
Foro +/-0.025mm |
D1 | L1 | D2 | L3 | HEX |
| HCRT-040-XXX | M4 | 0.5-0.90 | 4 | 4 | M4 | 4 | 2 |
| HCRT-050-XXX | M5 | 0.50-1.40 | 5 | 5 | M5 | 5 | 2.5 |
| HCRT-060-XXX | M6 | 0.50-1.90 | 6 | 6 | M6 | 6 | 3 |
| HCRT-080-XXX | M8 | 0.50-2.90 | 8 | 8 | M8 | 8 | 4 |
| HCRT-100-XXX | M10 | 0.50-3.95 | 10 | 10 | M10 | 10 | 5 |
| HCRT-120-XXX | M12 | 0.50-4.95 | 12 | 12 | M12 | 12 | 6 |
XXX: diametro foro calibrato es. 127=1.27mm
| COD. | Filetto |
Foro +/-0.001” |
D1 | L1 | D2 | L3 | HEX | |
| HCRT-164-XXX | 8-32 | .020-.035 | 0.164 | 0.188 | 8-32 | 0.188 | 5/64 | |
| HCRT-190-XXX | 10-32 | .020-.050 | 0.190 | 0.188 | 10-32 | 0.188 | 3/32 | |
| HCRT-250-XXX | 1/4-28 | .020-.085 | 0.250 | 0.250 | 1/4-28 | 0.250 | 1/8 | |
| HCRT-312-XXX | 5/16-24 | .020-.115 | 0.312 | 0.313 | 5/16-24 | 0.313 | 5/32 | |
| HCRT-375-XXX | 3/8-24 | .020-.145 | 0.375 | 0.375 | 7/16-20 | 0.375 | 3/16 | |
| HCRT-437-XXX | 7/8-20 | .020-.175 | 0.437 | 0.375 | 1/2-20 | 0.375 | 7/32 | |
| HCRT-500-XXX | 1/2-20 | .020-.210 | 0.500 | 0.500 | 0.500 | 1/4 | ||
| COD. | Filetto |
Foro +/-0.001” |
D1 | L1 | D2 | L3 | HEX | |
| HCRP-062-XXX | 1/16-27 NPTF | .020–.115 | 0.312 | 0.300 | 1/16–27 NPTF | 0.300 | 5/32 | |
| HCRP-125-XXX | 1/8-27 NPTF | .020–.145 | 0.405 | 0.300 | 1/8–27 NPTF | 0.300 | 3/16 | |
| HCRP-250-XXX | 1/4-18 NPTF | .020–.210 | 0.540 | 0.460 | 1/4–18 NPTF | 0.460 | 1/4 | |
| HCRP-375-XXX | 3/8-18 NPTF | .020–.270 | 0.675 | 0.406 | 3/8– 18 NPTF | 0.406 | 5/16 | |
XXX: diametro foro calibrato es. 050= 0.050”
CRE
| COD. |
Foro +/-0.025mm |
D1 | L1 | L2 | L3 | D2 +0.1/-0 | D3 |
| CRE040-XXX | 0.5-1.3 | 4 | 4 | 6 | 4 | 4 | 3.3 |
| CRE050-XXX | 0.5-1.9 | 5 | 5.5 | 8.2 | 5.5 | 5 | 4.3 |
| CRE060-XXX | 0.5-2.5 | 6 | 6.5 | 9.9 | 6.5 | 6 | 5.3 |
| CRE070-XXX | 0.5-3.3 | 7 | 7.5 | 11.6 | 7.5 | 7 | 6.2 |
| CRE080-XXX | 0.5-3.8 | 8 | 8.5 | 13.3 | 8.5 | 8 | 7.2 |
| CRE090-XXX | 0.5-4.3 | 9 | 10 | 15.5 | 10 | 9 | 8.2 |
| CRE100-XXX | 0.5-4.9 | 10 | 11 | 17.1 | 11 | 10 | 9.2 |
| CRE120-XXX | 0.5-6.1 | 12 | 13 | 20.5 | 13 | 12 | 11 |
| CRE140-XXX | 0.5-7.1 | 14 | 15 | 23.7 | 15 | 14 | 13 |
XXX: diametro foro calibrato es. 127=1.27mm
| COD. |
Foro +/-0.001” |
D1 | L1 | L2 | L3 | D2 +.039/-0 | D3 |
| CRE156-XXX | .02-.05 | 0.187 | 0.158 | 0.24 | 0.16 | 0.156 | 0.130 |
| CRE187-XXX | .02-.07 | 0.218 | 0.217 | 0.31 | 0.22 | 0.187 | 0.160 |
| CRE218-XXX | .02-.085 | 0.218 | 0.217 | 0.33 | 0.22 | 0.281 | 0.190 |
| CRE250-XXX | .02-.105 | 0.250 | 0.256 | 0.40 | 0.26 | 0.250 | 0.220 |
| CRE281-XXX | .02-.13 | 0.281 | 0.296 | 0.46 | 0.30 | 0.281 | 0.250 |
| CRE312-XXX | .02-.15 | 0.312 | 0.335 | 0.52 | 0.34 | 0.312 | 0.281 |
| CRE343-XXX | .02-.16 | 0.343 | 0.394 | 0.60 | 0.40 | 0.343 | 0.312 |
| CRE375-XXX | .02-.18 | 0.375 | 0.394 | 0.62 | 0.40 | 0.375 | 0.343 |
| CRE406-XXX | .02-.195 | 0.406 | 0.434 | 0.67 | 0.44 | 0.406 | 0.375 |
| CRE437-XXX | .02-.22 | 0.437 | 0.512 | 0.77 | 0.52 | 0.437 | 0.406 |
| CRE468-XXX | .02-.24 | 0.468 | 0.512 | 0.81 | 0.52 | 0.468 | 0.437 |
| CRE562-XXX | .02-.29 | 0.562 | 0.591 | 0.94 | 0.60 | 0.562 | 0.510 |
XXX: diametro foro calibrato es. 050= 0.050”
PRESSIONE DI TENUTA: 280BAR